- 1U chassis supports for maximum motherboard sizes - ATX 12" x 10" and Micro-ATX 9.6" x 9.6"
- 4 x 3.5" hot-swap SAS/SATA
- SAS or enterprise SATA HDD only recommended
- 4-port 1U TQ backplane (W/ enclosure management), support up to 4x 3.5-inch SAS/SATA HDD
- 1U 400W Multi-output 80PLUS gold power supply, 24pin output
- 1 full-height & half-length expansion slot(s) (Riser Card Required)
- 4 x 4cm high performance PWM fan(s)
- Optional 1 x fan for PCI card cooling
-
-
- 1U chassis supports for maximum motherboard sizes - ATX 12" x 10" and Micro-ATX 9.6" x 9.6"
- 4 x 3.5" hot-swap SAS/SATA
- SAS or enterprise SATA HDD only recommended
- 4-port 1U TQ backplane (W/ enclosure management), support up to 4x 3.5-inch SAS/SATA HDD
- 1U 560W Multi-output 80PLUS gold power supply, 24pin output
- 1 full-height & half-length expansion slot(s) (Riser Card Required)
- 4 x 4cm high performance PWM fan(s)
- Optional 1 x fan for PCI card cooling
-
- 1U chassis support for motherboard size 13.68" x 13" and ATX 12" x 10", E-ATX 12" x 13"
- 4 x 3.5" hot-swap SAS/SATA drive bay with SES2
- SAS or enterprise SATA HDD only recommended
- 4-port 1U TQ backplane (W/ enclosure management), support up to 4x 3.5-inch SAS/SATA HDD
- 1U 500W platinum efficiency multiple output power supply w/pmbus
- 1 full-height & full-length expansion slot(s) (Riser Card Required)
- 4 x 4cm heavy duty counter-rotating with optimal fan(s) speed control
- Optional 2 x fan for PCI card cooling
-
- 1U chassis support for motherboard size ATX 12" x 10", E-ATX 12" x 13"
- 4 x 3.5" hot-swap SAS/SATA drive bay with SES2
- SAS or enterprise SATA HDD only recommended
- 4-port 1U TQ backplane (W/ enclosure management), support up to 4x 3.5-inch SAS/SATA HDD
- 1U 650W Redundant power supply, 54.5mm width
- 1 full-height & full-length expansion slot(s) (Riser Card Required)
- 4 x 4cm heavy duty counter-rotating with optimal fan(s) speed control
-
- 1U chassis support for maximum motherboard size - 12" x 13", 13" x 13.68". Support up to 12"x13" MB with rear 2.5" HDD option installed.
- 12 x 3.5" hot-swap SAS/SATA drive bay with SES2 and Mini-i-Pass (SFF 8087) connectivity
- 1U 500W Redundant Platinum Super Quiet power supply W/PMbus
- 7 low-profile expansion slot(s)
- 3 x 8cm high-performance PWM fan(s)
- Optional 5x 6cm hot-swap cooling fans
-
- 1U chassis support for motherboard size ATX 12" x 10", E-ATX 12" x 13"
- 4 x 3.5" hot-swap SAS/SATA drive bay with SES2
- SAS or enterprise SATA HDD only recommended
- 4-port 1U TQ backplane (W/ enclosure management), support up to 4x 3.5-inch SAS/SATA HDD
- 1U 650W Redundant power supply, 54.5mm width
- 1 full-height & full-length expansion slot(s) (Riser Card Required)
- 4 x 4cm heavy duty counter-rotating with optimal fan(s) speed control